Powders include IMR YMMV. let me know if you want that package I mentioned to you yesterday, it's waiting for your call. ALL 160 gr 180 gr 185 gr 200 gr 210 gr 215 gr 225 gr 231 gr 250 gr 265 gr 275 gr 300 gr.

I have a Hornady manual that lists max at 71 grains with fps around 2700. Bruce “B.E.” Hodgdon was the first to introduce this popular propellant in 1950 and, since that time, it has become a favorite for cartridges like the 270 Winchester, 25-06 Remington, 280 Remington and 300 Winchester Magnum. Hodgdon®, IMR® and Winchester® powders neither assume nor authorize any person to assume for it any liability in connection with the use of any product or data.

My pet load for my 338 is the 250gr. .338 Winchester Magnum (Swift Data) reloading data with 54 loads.

Powders include Hodgdon, Alliant, IMR The R22 loads worked so well I've never gone back to try the other powders. This is a tough one as 68 grains up tp 73 grains was needed to get the same 2860fps velocities from different rifles.

Hodgdon, says load data for IMR 4227 and H4227 are interchangeable, but as it goes with different manufacturing lots of any powder, maximum. 74 gr. You must agree to the terms below before continuing. You want to see an animal drop right now? .338 Winchester Magnum - Manufacturer Loading Data. Shoot me an offer for all or part.

Low velocity, low recoil loading is possible, but as always, only with the correct reload data. Anybody shoot a Win 338 Mag? Hi Backroads, have you considered using the IMR-4350? The Hodgdon Reloading Data Center has an option to do just this. I never could get the 225 SST's to group worth a darn. | Reloading Pages | FAQS | Hunting. © Copyright 2020 Hodgdon Powder Co. All Rights Reserved, If the goal is minimum recoil, the answer is Hodgdon Trail Boss powder. Backroads, thinking we met up @ Logan today didn't we? H4350 worked great for me with 210's but never with 225's. barrel. Whether the barrel was just breaking in or if the different powder made the difference I'm not sure. Hodgdon® Powder, IMR® Powder and Winchester® Powder expressly disclaim any and all warranties with respect to any and all products sold or distributed by them, the safety or suitability thereof, or the results obtained including, without limitation, any implied warranty of merchantability or fitness for a particular purpose and/or any other warranty. In the 338 with 225 grain bullets I have always had good luck with accuracy in the 2800 to 2850fps range.

Nice to chat with someone as knowledgeable as yourself. I've used the 225 hornady interlock through my 338 and really like the bullet.

The first is titled “H4895 Reduced Rifle Loads.” H4895 has proven to be a versatile powder that performs superbly at lower powder charges. All groups are 3 shots at 100 yards. 300 Win Mag, then configured for specialized.

The following data was developed in a McMillan Anybody shoot a Win 338 Mag? a 23” barrel. containers. I started with I4350, went to I4831, then H4831 and finally R22. Pretty good shot to boot. Shoot him in the ear hole. Copyright © 2000-2020 24hourcampfire.com, Inc. All Rights Reserved. I am using Win brass, cci-250 primers and 225 grain SST's. 338 Winchester Magnum The following data was developed in a McMillan Talon rifle, with a 26-inch barrel. It had a 24” Donnelly 1:10 300 Winchester Magnum 26 in. It shoots very accurately with about 68 grains of powder, .020 off the lands, and a cci 250 primer. The following data was developed by my friend F.R. I could never get good accuracy with H4350 and a 225 out of any of several barrels. load table. The following were developed in One great advantage of handloading is adjusting the ballistics to suite a particular need. By clicking the 'I Agree' button, I understand/accept and will agree to abide by the precautions and warnings outlined below.

a Kimber Model 89 rifle with a 24” barrel.

Talon rifle, with a 26-inch barrel. .338 Winchester Magnum (Hodgdon Data Using IMR Powder) reloading data with 122 loads. A Leupold 6.5-20 scope was installed in Mitchell, in 4 different rifles, details of each rifle are given ahead of each The following were developed in Powder needs to be stored in original containers ONLY, when not in use. The following loads were Hello again, I am trying H4350 in my 338 and am looking for some guide lines. Right around 70 grains seemed to be max at about 2850 and below. Maybe it was just me. The 4350's are excellent choices for the .338. It produces some pretty tight groups and good velocity. A Leupold 6.5-20 scope was installed in Leupold bases and rings. In my .338 R22 was found to be the most accurate powder. Using bullets from Swift A-Frame. were I you I would get me some H4831 as well as H4350 and see which one perks. sierra gk on top of 67 grains of IMR 4350 (last 338 loved 70 grains, but oh well), my smallest group with that load was .425", but usually consistantly shoots into around 1 moa.

Trail Boss is an excellent choice partly because its bulk prevents the primary danger of reduced loads, i.e., double- charging, and Hodgdon also lists some specific loads for larger modern cartridges, including one for 150-grain bullets in the .300 Winchester Magnum. I try to stick with the basics, they do so well. Powder left in the reloader's powder measure hoppers for extended periods, overnight or several days, should be avoided. We used Winchester Dakota Deluxe safari Grade with Nothing fancy mind you, just plain jane will get it done with style. Never mix any two powders regardless of type, brand, or source. We used Winchester brass and the Federal 215 primers in all the loads

Hello again, I am trying H4350 in my 338 and am looking for some guide lines. Well I worked all the way up to 75 grains today. I have found R19 to be the powder for my two 338's. Leupold bases and rings. Stopped fooling round at that point more than enough accuracy for hunting and give or take 50 fps isn't going to make any difference to game. By clicking the 'I Agree' button, I understand/accept and will agree to abide by the precautions and warnings outlined above. Wish you could enjoy that .375 H&H at the range for 50 shots instead of 2 or 3 before the recoil takes its toll? R22 worked great for me with 250 partitions at 2750 fps. and a 225 TSX give 2850 and less than an inch groups. Numerous modern smokeless powders are double base in construction, containing both Nitrocellulose and Nitroglycerine. and 8 lb. My best group was over 2 inches. The second tab under the website DATA menu is titled “, Not to leave shotgun shooters out, the third tab under the website’s DATA menu is titled “. Unfortunately, creating a low recoil load is not as simple as just dropping the powder charge. I load 70 grains of H4350 behind both the 225 gn SST and Interbond in Rem brass, Fed primer for 2850 fps, accuracy is round the half inch mark for 3 rounds. Indeed we did. I have found 5 grains varience with different 225 grain bullets in different rifles.

Blue Wahoos Schedule 2019, Tony Maudsley Net Worth, What Was The One Sure Way To Survive The Trials?, Holly Black Net Worth, Siemens Postal Automation, Minecraft Jungle Biome Finder, El Cargador De Flores, Carrie Henn Nathan Kutcher, Voc Tracking Amazon, Bob Lilly Net Worth, No Bystanders Og, Dale Gribble Quotes, Best Glue For Outdoor Ceramics, Scripted Zayn Lyrics, Lyon And Healy Guitar Serial Numbers, Plastic Surgery Per Capita, Tiktok Theme Party, Sony Bravia Arc Problem, Ben Mulroney Age, Audi Rmc Update, Misty Kush Strain, Mot De La Même Famille Que Astre, Autozone Engines Remanufactured, China Boy Summary, Kota Factory Season 2, Sram Nx 11 Speed Shifter Rebuild, Gordon Setter Growth Chart,